Home / Products / ZENSTAT / Prime
POLYZEN ZENSTAT · ESD FLOORING SYSTEM

ZENSTAT
PrimeZS-100 · ANTI-STATIC ESD FLOOR

POLYZEN's entry-tier anti-static epoxy floor — it controls surface static charge and prevents harmful charge build-up underfoot in electronics handling, light-assembly and storage areas.

Get a Quote Download TDS
ZS-100 BUCKET RENDER REFERENCE VISUAL — TO BE ADDED
2-PartKit System
Anti-StaticESD Floor
TurnkeySupply or Applied
Made in IndiaBy POLYZEN
01
OVERVIEW

What is ZENSTAT Prime (ZS-100)?

ZENSTAT Prime is POLYZEN's entry-tier anti-static epoxy floor — the foundation of the ZENSTAT ESD range. It controls surface static charge and prevents harmful charge build-up underfoot, protecting sensitive electronics across handling, light-assembly and storage environments. Supplied as a pre-measured kit and installed as part of a grounded static-control system, formulated and manufactured by POLYZEN.

• Anti-static surface • Charge build-up control • Hard-wearing epoxy finish • Grounded static-control system
02
KIT COMPOSITION

A Pre-Measured System

Every ZENSTAT Prime kit ships with components pre-measured for on-site accuracy — open, blend to the specified ratio, and apply. Consistent static-control performance, no guesswork.

PART A

Conductive Epoxy Resin

Static-control epoxy resin base that carries the floor's anti-static performance.

PART B

Hardener

Curing agent matched to the resin for a durable, chemically resistant anti-static finish.

Mix RatioPer TDS
Pack SizeTo be confirmed
Cure SystemPer TDS

ZENSTAT Prime is a two-part conductive epoxy anti-static coating, installed as part of a grounded static-control system. Mix ratio, pack weights, cure data and surface-resistance values are published on the product Technical Data Sheet (TDS). Formulation is proprietary to POLYZEN.

03
TECHNICAL SPECIFICATIONS

Performance Data

Full tested values are listed on the product TDS. Figures below will be populated from verified test reports.

PropertyValueTest Method
Surface Resistance to Ground (Rg)Per TDSPer TDS
Point-to-Point Resistance (Rp)Per TDSPer TDS
ESD ClassificationAnti-static—
Compressive StrengthPer TDSPer TDS
Abrasion ResistancePer TDSPer TDS
Chemical ResistancePer TDSPer TDS
Applied Thickness RangePer TDS—
FinishMatt / Satin—
VOC ContentPer TDSPer TDS
04
COVERAGE

How Far Does a Kit Go?

Per TDS

Coverage depends on the number of coats and substrate profile. The exact coverage rate is specified on the product Technical Data Sheet. Use the POLYZEN Coverage Calculator (coming soon) for project estimates.

05
APPLICATIONS

Where ZENSTAT Prime Performs

Electronics Handling & Storage
Light Electronics Assembly
Component Warehousing & Distribution
IT & Server Support Rooms
Telecom Equipment Rooms
Electronics Repair & Test
06
DOWNLOADS

Documentation

Technical Data Sheet

Specs, mix ratio & coverage (TDS)

→

Safety Data Sheet

Handling & safety info (SDS)

→

Method Statement

Application methodology (MS)

→
07
FAQ

Common Questions

What is ZENSTAT Prime (ZS-100)?
ZENSTAT Prime is POLYZEN's entry-tier anti-static epoxy floor and the foundation of the ZENSTAT ESD range. It controls surface static charge and prevents harmful charge build-up underfoot, protecting sensitive electronics in handling, light-assembly and storage areas. It is supplied as a pre-measured kit and installed as part of a grounded static-control system, formulated and manufactured by POLYZEN.
What is the difference between anti-static, dissipative and conductive ESD floors?
They differ by how much electrical resistance they offer and how quickly they move static charge to ground. Anti-static floors such as ZENSTAT Prime provide entry-level control that prevents charge build-up. Static-dissipative floors release charge in a slower, controlled way for sensitive electronics, and conductive floors discharge fastest for the most critical environments. POLYZEN offers all three — Prime (ZS-100), Dissipative (ZS-200) and Conductive (ZS-300).
Where is ZENSTAT Prime used?
It suits electronics handling and storage, light electronics assembly, component warehousing and distribution, IT and server support rooms, telecom equipment rooms, and electronics repair and test areas — wherever floors need reliable anti-static control without the demands of a fully conductive system.
Does ZENSTAT Prime need earthing and grounding?
Yes. Like all static-control floors, it performs as part of a grounded system that carries static charge safely to earth. POLYZEN installs the required earthing connections as part of the applied system, so the floor functions as intended on site.
Which ESD standards apply to ZENSTAT floors?
The recognised framework for static control is IEC 61340-5-1 and ANSI/ESD S20.20. Within the ZENSTAT range, the strict ESD-floor resistance limits are met by Dissipative (ZS-200) and Conductive (ZS-300), while Prime provides entry-level anti-static control. Verified resistance values for each product are published on its Technical Data Sheet.
Can POLYZEN supply and install ZENSTAT Prime?
Yes. POLYZEN manufactures ZENSTAT Prime and offers it both as supply-only kits for trade partners and applicators, and as a turnkey applied system covering survey, surface preparation, grounding, application and warranty.

Want this floor installed by POLYZEN?

Get ZENSTAT Prime delivered as a complete applied system — survey, grounding and application to warranty.

Get this installed →
08
RELATED PRODUCTS

Explore the ZENSTAT Range

ZS-200

ZENSTAT Dissipative

Static-dissipative ESD floor→ ZS-300

ZENSTAT Conductive

Conductive ESD floor→ ESD RANGE

ZENSTAT

Compare all ESD floors→

Get Your ZENSTAT Prime Quote

Project pricing, trade enquiries and spec support — talk to POLYZEN.

Get a Quote Trade Enquiry WhatsApp Us