Aviation
& AirportsTERMINAL-SCALE · FUEL-RESISTANT · ESD-READY
Terminal-scale seamless floors, fuel- and hydraulic-resistant hangar systems, and ESD-controlled avionics and fuel zones — engineered for the full airport footprint, landside to airside.
Flooring for Airports & Aviation
An airport is several demanding facilities under one operation. Terminals carry enormous footfall and must stay flawless; hangars and MRO bays face jet fuel, hydraulic fluid and heavy equipment; avionics workshops and fuel zones need controlled static; and flight catering runs an industrial kitchen. POLYZEN engineers terminal-scale, fuel-resistant, ESD-controlled and food-safe systems across the whole footprint — landside to airside.
What an Airport Floor Must Deliver
Each requirement below maps to operational uptime, safety or asset protection.
Terminal-Scale Durability
Seamless floors that survive enormous, continuous passenger footfall.
Fuel & Hydraulic Resistance
Hangar and MRO floors that resist jet fuel, hydraulic fluid and oils.
ESD Control
Static-controlled avionics workshops and grounded fuel-handling zones.
Heavy-Equipment Loads
Withstands ground-support equipment, tugs and baggage systems.
Slip Safety
Engineered grip for terminals, wet zones and apron-side areas.
Food-Safe Catering
Thermal-shock, slip-safe systems supporting flight-kitchen hygiene.
Demarcation & Wayfinding
Line marking for passenger flow, safety zones and equipment lanes.
Operational-Window Installation
Phased, rapid-cure options to work around 24/7 airport operations.
Engineered to Support Aviation Standards
POLYZEN systems are specified to support the durability, ESD and safety frameworks airport facilities are assessed against.
Hangar & MRO Durability
Supports fuel, hydraulic-fluid and abrasion resistance for hangar and maintenance floors.
IEC 61340-5-1
Supports static control in avionics workshops and fuel-handling zones.
Fire & Safe Egress
Supports low-shedding surfaces and clear egress for high-occupancy terminals.
Slip Resistance
Supports passenger and worker safety in terminals, wet and apron-side areas.
IGBC / LEED
Supports green-airport credits with low-VOC, long-life, low-maintenance systems.
Material performance values are stated Per TDS. POLYZEN supplies and applies flooring systems engineered to support airport durability, ESD and safety frameworks; certification of the facility remains with the operator.
The Right System for Each Zone
An airport runs from passenger terminal to fuel-handling hangar. POLYZEN specifies zone-by-zone.
| Zone | Primary Demand | Recommended System |
|---|---|---|
| Terminal Concourse / Check-in | Massive footfall, seamless | ZENFLOR ProZF-300 |
| Premium Lounges | Aesthetics, comfort | ZENDÉCOR VeinaZD-V |
| Baggage Handling | Abrasion, heavy equipment | ZENFLOR SovereignZF-500 |
| Aircraft Hangar / MRO | Fuel, hydraulic, abrasion | ZENFLOR SovereignZF-500 |
| Avionics / Electronics Workshop | Static control (ESD) | ZENSTAT DissipativeZS-200 |
| Fuel / Hazard Zones | Grounded ESD, chemical | ZENSTAT ConductiveZS-300 |
| Flight Catering Kitchen | Thermal shock, food-grade | ZENPU CretescreedZP-300 |
| Multi-Level Parking | Tyre, abrasion, oil | ZENDECK ParkZK-100 |
| Ramps / Service Roads | Anti-skid, weathering | ZENDECK GripZK-300 |
POLYZEN Systems for Aviation & Airports
Manufacturer-formulated, applied as turnkey. Every system carries its own Technical Data Sheet.
ZENFLOR Sovereign
Heavy-duty chemical-resistant epoxy — hangars, MRO & baggage→ ZF-300 · EPOXYZENFLOR Pro
Self-leveling epoxy — terminal concourse→ ZS-300 · ESDZENSTAT Conductive
Grounded conductive floor — fuel & hazard zones→ ZS-200 · ESDZENSTAT Dissipative
Static-dissipative floor — avionics workshops→ ZP-300 · PUZENPU Cretescreed
Food-grade PU concrete — flight catering→ ZK-100 · SIGNATUREZENDECK Park
Parking-deck coating — multi-level parking→Applied Flooring Services
Turnkey installation — survey, substrate preparation, application and warranty.
From Survey to Validated Floor
Inspect & Assess
Substrate survey, moisture (MVT) testing and zone-by-zone requirement mapping.
Specify
System selection per zone, with BOQ, ITP and specification support for your consultant.
Apply
Mechanically Prepared / Ground / Shot-Blasted substrate, then layer-by-layer system build-up.
Validate & Warrant
Handover documentation, ESD verification where applicable and written system warranty.
Technical Documentation
Specification-ready documents for engineers, consultants and QA teams.
Aviation Flooring — FAQ
Planning floors for an airport or aviation facility?
Share your facility zones and POLYZEN will specify the right system for each — survey to warranty.
Engineer Floors for the Full Airport Footprint
Spec consultation, project pricing and documentation support — talk to POLYZEN.