The ZENFLOR Range

For warehouses, garages and service areas where the priority is sealing and protecting concrete from wear and dust.

For showrooms, commercial spaces and clean industrial units that need a hygienic, jointless, premium finish.

For heavy industry, chemical plants and food or pharmaceutical facilities demanding maximum resistance and standards.

Coat is a two-part epoxy coating that seals and protects sound concrete. Pro is a three-part self-levelling epoxy that gives a smooth, jointless, easy-clean surface. Sovereign is the flagship self-levelling build, and is specified in a novolac configuration where chemical attack is the governing factor. Exact build and coverage are per the product TDS.

Thickness is not a finish choice. Epoxy coatings are measured in microns, while self-levelling and mortar builds are measured in millimetres, and the build is decided by traffic, impact, chemical exposure and how flat the existing slab is. The difference between a coating and a mortar build is explained in our comparison of self-levelling epoxy and epoxy mortar. The specified build for any project is per the product TDS.

Sometimes, but never on assumption. The old coating has to be tested for adhesion and the slab checked for moisture, and the surface has to be mechanically prepared rather than simply cleaned. If the existing system is already lifting or delaminating, it comes off. What preparation actually involves is set out in our guide to concrete surface preparation.

Epoxy is used widely in hygiene-critical areas because it is seamless and non-porous. Where the floor also faces hot washdown, steam cleaning or sharp temperature swings, PU concrete is normally specified instead of epoxy, and that is the ZENPU range. We will tell you which one your process actually needs rather than sell you the one you asked for.

Chemical resistance depends on the specific chemical, its concentration, the temperature and how long it sits on the floor before it is cleaned up. A general claim of chemical resistance means very little on its own. Where chemical attack decides the specification, the Sovereign novolac configuration is the one to look at, and resistance data is per the product TDS.

Both, under one contract. POLYZEN INDIA formulates and manufactures its own systems and also applies them, so supply and workmanship sit with the same party. If you want an indicative budget figure before talking to anyone, CostMyFloor works it out from four questions.