Home / Products / ZENSTAT / Dissipative
POLYZEN ZENSTAT · ESD FLOORING SYSTEM

ZENSTAT
DissipativeZS-200 · STATIC-DISSIPATIVE ESD FLOOR

POLYZEN's static-dissipative ESD floor — it releases static charge to ground in a slow, controlled way, protecting sensitive electronics while keeping personnel safe from sudden discharge.

Get a Quote Download TDS
ZS-200 BUCKET RENDER REFERENCE VISUAL — TO BE ADDED
3-PartKit System
DissipativeESD Floor
TurnkeySupply or Applied
Made in IndiaBy POLYZEN
01
OVERVIEW

What is ZENSTAT Dissipative (ZS-200)?

ZENSTAT Dissipative is POLYZEN's static-dissipative ESD floor — the workhorse of the ZENSTAT range. It moves static charge to ground in a slow, controlled way, protecting sensitive electronics while keeping personnel safe from sudden discharge. Supplied as a pre-measured kit and installed over a copper earthing grid as a grounded ESD system, formulated and manufactured by POLYZEN.

• Controlled static dissipation • Copper earthing grid • Sensitive-electronics grade • Grounded ESD system
02
KIT COMPOSITION

A Pre-Measured System

Every ZENSTAT Dissipative kit ships with components pre-measured for on-site accuracy — open, blend to the specified ratio, and apply over the prepared earthing grid. Consistent dissipative performance, no guesswork.

PART A

Conductive Epoxy Resin

Conductive epoxy resin base that carries the floor's controlled static-dissipative performance.

PART B

Hardener

Curing agent matched to the resin for a durable, chemically resistant dissipative floor.

PART C

Conductive Aggregate

Graded conductive aggregate that gives the floor its body and even charge dissipation across the surface.

Mix RatioPer TDS
Pack SizeTo be confirmed
Cure SystemPer TDS

ZENSTAT Dissipative is a three-part conductive epoxy floor, installed over a copper earthing grid as a grounded ESD system. Mix ratio, pack weights, cure data and surface-resistance values are published on the product Technical Data Sheet (TDS). Formulation is proprietary to POLYZEN.

03
TECHNICAL SPECIFICATIONS

Performance Data

Full tested values are listed on the product TDS. Figures below will be populated from verified test reports.

PropertyValueTest Method
Surface Resistance to Ground (Rg)Per TDSPer TDS
Point-to-Point Resistance (Rp)Per TDSPer TDS
ESD ClassificationStatic-dissipative—
Compressive StrengthPer TDSPer TDS
Abrasion ResistancePer TDSPer TDS
Chemical ResistancePer TDSPer TDS
Applied Thickness RangePer TDS—
FinishMatt / Satin—
VOC ContentPer TDSPer TDS
04
COVERAGE

How Far Does a Kit Go?

Per TDS

Coverage depends on applied thickness and substrate profile. The exact coverage rate is specified on the product Technical Data Sheet. Use the POLYZEN Coverage Calculator (coming soon) for project estimates.

05
APPLICATIONS

Where ZENSTAT Dissipative Performs

Electronics Manufacturing & Assembly
PCB & Circuit Board Production
Data Centres & Server Rooms
Telecom & Communications Facilities
Laboratories & R&D Facilities
Cleanrooms & Controlled Environments
06
DOWNLOADS

Documentation

Technical Data Sheet

Specs, mix ratio & coverage (TDS)

→

Safety Data Sheet

Handling & safety info (SDS)

→

Method Statement

Application methodology (MS)

→
07
FAQ

Common Questions

What is ZENSTAT Dissipative (ZS-200)?
ZENSTAT Dissipative is POLYZEN's static-dissipative ESD floor and the workhorse of the ZENSTAT range. It moves static charge to ground in a slow, controlled way, protecting sensitive electronics while keeping personnel safe from sudden discharge. It is supplied as a pre-measured kit and installed over a copper earthing grid as a grounded ESD system, formulated and manufactured by POLYZEN.
What is the difference between static-dissipative and conductive ESD floors?
A static-dissipative floor moves charge to ground gradually through a higher-resistance path, giving a gentle, controlled discharge that suits most sensitive-electronics environments. A conductive floor has lower resistance and discharges faster, for the most critical or explosive-risk areas. POLYZEN offers both — Dissipative (ZS-200) and Conductive (ZS-300) — plus entry-level anti-static Prime (ZS-100).
Where is ZENSTAT Dissipative used?
It suits electronics manufacturing and assembly, PCB and circuit-board production, data centres and server rooms, telecom and communications facilities, laboratories and R&D, and cleanrooms and controlled environments — wherever sensitive electronics need controlled, reliable static dissipation.
Which ESD standards apply to ZENSTAT Dissipative?
It is designed for the static-dissipative resistance band recognised by IEC 61340-5-1 and ANSI/ESD S20.20, the international framework for ESD control, which sets an upper limit below 1×10⁹ ohms for ESD flooring. Verified resistance values are confirmed on the product Technical Data Sheet from test reports.
Does ZENSTAT Dissipative need earthing and grounding?
Yes. A static-dissipative floor only works when connected to ground. ZENSTAT Dissipative is installed over a copper earthing grid bonded to the building's earth, and POLYZEN sets up these grounding connections as part of the applied system.
Can POLYZEN supply and install ZENSTAT Dissipative?
Yes. POLYZEN manufactures ZENSTAT Dissipative and offers it both as supply-only kits for trade partners and applicators, and as a turnkey applied system covering survey, surface preparation, copper-grid earthing, application and warranty.

Want this floor installed by POLYZEN?

Get ZENSTAT Dissipative delivered as a complete applied system — survey, copper-grid earthing and application to warranty.

Get this installed →
08
RELATED PRODUCTS

Explore the ZENSTAT Range

ZS-100

ZENSTAT Prime

Anti-static ESD floor→ ZS-300

ZENSTAT Conductive

Conductive ESD floor→ ESD RANGE

ZENSTAT

Compare all ESD floors→

Get Your ZENSTAT Dissipative Quote

Project pricing, trade enquiries and spec support — talk to POLYZEN.

Get a Quote Trade Enquiry WhatsApp Us