ZENSTAT
ConductiveZS-300 · CONDUCTIVE ESD FLOOR
POLYZEN's conductive ESD floor — the top of the ZENSTAT range. It discharges static almost instantly through a low-resistance path, for the most critical and explosive-risk environments.
What is ZENSTAT Conductive (ZS-300)?
ZENSTAT Conductive is POLYZEN's conductive ESD floor — the flagship of the ZENSTAT range. With the lowest electrical resistance of the three ZENSTAT floors, it carries static charge to ground almost instantly, eliminating the risk of a damaging or igniting discharge. It is the benchmark floor for the most demanding electronics and explosive-risk environments. Supplied as a pre-measured kit and installed over a dense copper earthing grid as a grounded ESD system, formulated and manufactured by POLYZEN.
A Pre-Measured System
Every ZENSTAT Conductive kit ships with components pre-measured for on-site accuracy — open, blend to the specified ratio, and apply over the prepared copper grid. Consistent conductive performance, no guesswork.
Conductive Epoxy Resin
Highly conductive epoxy resin base that carries the floor's rapid charge-to-ground performance.
Hardener
Curing agent matched to the resin for a durable, chemically resistant conductive floor.
Conductive Aggregate
Graded conductive aggregate that builds an even, continuous conductive path across the surface.
ZENSTAT Conductive is a three-part conductive epoxy floor, installed over a dense copper earthing grid and finished as a grounded ESD system. Mix ratio, pack weights, cure data and surface-resistance values are published on the product Technical Data Sheet (TDS). Formulation is proprietary to POLYZEN.
Performance Data
Full tested values are listed on the product TDS. Figures below will be populated from verified test reports.
| Property | Value | Test Method |
|---|---|---|
| Surface Resistance to Ground (Rg) | Per TDS | Per TDS |
| Point-to-Point Resistance (Rp) | Per TDS | Per TDS |
| ESD Classification | Conductive | — |
| Compressive Strength | Per TDS | Per TDS |
| Abrasion Resistance | Per TDS | Per TDS |
| Chemical Resistance | Per TDS | Per TDS |
| Applied Thickness Range | Per TDS | — |
| Finish | Matt / Satin | — |
| VOC Content | Per TDS | Per TDS |
How Far Does a Kit Go?
Coverage depends on applied thickness and substrate profile. The exact coverage rate is specified on the product Technical Data Sheet. Use the POLYZEN Coverage Calculator (coming soon) for project estimates.
Where ZENSTAT Conductive Performs
Common Questions
Want this floor installed by POLYZEN?
Get ZENSTAT Conductive delivered as a complete applied system — survey, dense copper-grid earthing and application to warranty.
Explore the ZENSTAT Range
Get Your ZENSTAT Conductive Quote
Project pricing, trade enquiries and spec support — talk to POLYZEN.