Epoxy Parking
Deck CoatingTOUGH · ANTI-SKID · LINE-READY
A heavy-duty epoxy & aggregate-broadcast deck system for car parks and vehicular floors — a high-build, abrasion-tough, oil-resistant surface with a built-in anti-skid texture that takes constant tyre traffic and accepts crisp bay and lane marking.
What is Epoxy Parking Deck Coating?
Epoxy parking deck coating is a heavy-duty, multi-layer resin floor engineered for the punishment a vehicular deck takes every day — turning tyres, point loads, oil and fuel spills, and constant abrasion. A high-build epoxy body is laid over a mechanically prepared, primed slab and a graded aggregate is broadcast into it to refusal, then locked down with a sealing top coat. The result is a tough, oil-resistant, anti-skid surface that holds up to car-park traffic, cleans easily and accepts crisp bay, lane and directional marking. It is the core ZENDECK system for covered and intermediate parking levels.
How the System Is Built
A parking deck is built up layer-by-layer over a sound, mechanically prepared slab — a broadcast build that gives both strength and grip. Tap any layer to see its role.
Seal + Anti-Skid Topcoat
An encapsulating seal coat locks the broadcast aggregate in place, giving a hard-wearing, cleanable, anti-skid surface. Bay, lane and directional marking is then applied for a finished, ready-to-use deck. System values: Per TDS.
Built with ZENDECK Park (ZK-100)
This deck is delivered using ZENDECK Park (ZK-100) — POLYZEN's heavy-duty epoxy parking-deck system, formulated and manufactured by POLYZEN and applied turnkey with survey, mechanical preparation, aggregate-broadcast build, line marking and warranty.
Built for Vehicular Punishment
A parking deck faces a unique mix of stresses — point loads from parked vehicles, scrubbing from turning tyres, oil and fuel attack, and heavy abrasion at ramps and aisles. The ZENDECK Park build is engineered for exactly that. Performance is confirmed on the product TDS.
Build thickness, aggregate grade and number of coats are specified per deck traffic and exposure. POLYZEN confirms finished values on the product TDS and does not publish fabricated figures.
The Application Process
Inspect & Assess
Survey traffic, slope and drainage, check moisture and review the existing deck condition.
Prepare & Prime
Diamond-grind or shot-blast the slab, repair cracks and spalls, then apply the bonding primer.
Build & Broadcast
High-build epoxy body → aggregate broadcast to refusal → cure and de-sand for anti-skid texture.
Seal & Mark
Encapsulating seal coat, then bay, lane and directional line marking, final inspection and warranty.
System Specifications
| Property | Detail |
|---|---|
| System Type | Epoxy Parking Deck Coating (Vehicular) |
| POLYZEN Product | ZENDECK Park (ZK-100) |
| Delivery | POLYZEN Applied System (turnkey) / Supply Kit |
| Build-Up | Primer + Epoxy Body + Aggregate Broadcast + Seal Topcoat |
| Substrate Prep | Mechanically Prepared / Ground / Shot-Blasted |
| Finish | Anti-Skid Texture · Bay & Lane Marking |
| Resistance | Oil · Fuel · Abrasion · Point Load |
| Coverage / Thickness | Per Product TDS |
Ideal Applications
Download Technical Data
Applied & Warranted
Every POLYZEN parking deck is installed by trained applicators and handed over after a final inspection, line marking and a written system warranty. Warranty terms are confirmed per project scope, traffic load and substrate condition.
Frequently Asked Questions
Related Car Park & Deck Systems
Engineer a Deck That Takes the Load.
Get a site survey, system recommendation and quote for your parking deck.