Pharma-Grade
FlooringCLEANROOM HYGIENE SYSTEM
A seamless, cleanroom-grade floor with antimicrobial hygiene detailing and integral coving — engineered for pharmaceutical and life-science environments where contamination control and validation are critical.
What is Pharma-Grade Flooring?
Pharma-grade flooring is a seamless, cleanroom-ready resin system built for pharmaceutical and life-science facilities. It combines a non-absorbent, antimicrobial-grade surface with integral coved skirting and crevice-free detailing to eliminate contamination traps — supporting cleanroom classification, validation and the rigorous wash-down and sanitisation regimes these environments demand.
How the System Is Built
A pharma-grade floor is an engineered stack — every layer has a job. Tap any layer to see its role.
Antimicrobial Hygienic Seal
A hygienic, antimicrobial-grade seal closes the floor into a smooth, non-absorbent, sanitisable surface, carried up the wall as integral coving to remove every floor-wall crevice. Finish and slip rating are specified to the cleanroom class. System values: Per TDS.
POLYZEN ZENPU Level (ZP-200) + ZENFLOR Sovereign (ZF-500)
This floor is delivered using POLYZEN ZENPU Level (ZP-200) for steam-clean and thermal-shock cleanrooms, or ZENFLOR Sovereign (ZF-500) where chemical and abrasion duty leads — both formulated and manufactured by POLYZEN.
Built for Cleanroom Compliance
A pharma-grade floor is specified to support the hygiene, cleanroom-classification and validation requirements of pharmaceutical manufacturing. POLYZEN builds the floor to these references; facility certification remains the client's own.
The floor is engineered to support WHO-GMP, Schedule M and ISO 14644 cleanroom requirements; it does not itself replace a facility's validation or certification. Tested values are confirmed in the product TDS.
The Application Process
Inspect & Assess
Substrate survey, moisture testing and review of cleanroom class, cleaning and drainage.
Design & Specify
Resin choice (PU / epoxy), coving, fall-to-drain and antimicrobial finish to the class.
Prepare & Apply
Diamond grind / shot-blast → primer → seamless body → antimicrobial seal + coving.
Cure & Handover
Controlled cure, final inspection, hygiene/coving checks and written warranty.
System Specifications
| Property | Detail |
|---|---|
| System Type | Pharma-Grade Flooring |
| Linked Products | ZENPU Level (ZP-200) / ZENFLOR Sovereign (ZF-500) |
| Finish | Seamless · Antimicrobial · Coved |
| Build-Up | Primer + Seamless Body + Antimicrobial Seal + Coving |
| Supports | WHO-GMP · Schedule M · ISO 14644 |
| Coving | Integral cleanroom coving |
| Total Thickness | Per TDS |
| Chemical Resistance | Per TDS |
| Cure / Service Temp | Per TDS |
Sectors Served
Download Technical Data
Applied & Warranted
Every POLYZEN pharma-grade floor is installed by trained applicators and handed over with a final inspection and a written system warranty. Warranty terms are confirmed per project scope, cleanroom requirement and substrate condition.
Frequently Asked Questions
Related Epoxy Systems
Ready to Specify Your Pharma-Grade Floor?
Get a cleanroom-class build-up, coving detail and quote for your facility.