ZENDÉCOR
FleckZD-F · FLAKE
Flake decorative epoxy flooring — textured, multi-colour flake finishes that hide wear and add grip.
What is ZENDÉCOR Fleck (ZD-F)?
ZENDÉCOR Fleck is POLYZEN's flake decorative epoxy flooring system. Multi-colour vinyl flakes are broadcast into an epoxy base and sealed to create a textured, hard-wearing, slip-resistant finish that hides dirt and wear. Ideal for showrooms, garages, clinics and commercial spaces. Supplied as a pre-measured kit, formulated and manufactured by POLYZEN.
A Pre-Measured System
ZENDÉCOR Fleck is built on site from POLYZEN materials, each supplied as a pre-measured kit and covered by its own Technical Data Sheet.
| # | Layer | Product / operation | Consumption |
|---|---|---|---|
| 1 | Surface preparation | Diamond grinding / shot blast to CSP 3 | — |
| 2 | Primer | ZENPRIME 100 | 0.18 kg/m² |
| 3 | Levelling screed | ZENLEVEL 200 — 1.0 or 2.0 mm | 2.00 / 4.00 kg/m² |
| 4 | Grinding | Full-face diamond grind of the cured screed + vacuum | — |
| 5 | Colour base coat | ZENTOP CL 100 + Part D | 0.40 kg/m² |
| Part D pigment | Dispersed into the base coat | 0.020 kg/m² | |
| 6 | Flake broadcast | Vinyl flakes into the wet base | 0.45 kg/m² |
| 7 | De-fleck | Sweep, vacuum and scrape high chips after cure | — |
| 8 | Seal coat | ZENTOP CL 100, clear | 0.45 kg/m² |
Consumption figures are practical site values including normal wastage — use them for estimating. Mix ratios, pack weights and cure data are published on each product Technical Data Sheet. Filler and formulation detail is proprietary to POLYZEN.
Performance Data
Full tested values are listed on the product TDS. Figures below will be populated from verified test reports.
| Property | Value | Test Method |
|---|---|---|
| Compressive Strength | Per TDS | Per TDS |
| Bond / Adhesion Strength | Per TDS | Per TDS |
| Abrasion Resistance | Per TDS | Per TDS |
| Chemical Resistance | Per TDS | Per TDS |
| Slip Resistance | Per TDS | Per TDS |
| Applied Thickness Range | Per TDS | — |
| Finish | Flake / Textured | — |
| VOC Content | Per TDS | Per TDS |
How Far Does a Kit Go?
Coverage depends on applied thickness, flake broadcast rate and number of coats. The exact coverage rate is specified on the product Technical Data Sheet. Use the POLYZEN Coverage Calculator for project estimates.
Where ZENDÉCOR Fleck Performs
Common Questions
Want this floor installed by POLYZEN?
Get ZENDÉCOR Fleck delivered as a complete applied system — survey to warranty.
Explore the ZENDÉCOR Range
Get Your ZENDÉCOR Fleck Quote
Project pricing, trade enquiries and spec support — talk to POLYZEN.