ZENDECK
GripZK-300 · ANTI-SKID RAMP
Anti-skid ramp coating — a high-traction surface for sloped drives and ramps, with heat-reflective protection for sun-exposed areas.
What is ZENDECK Grip (ZK-300)?
ZENDECK Grip is POLYZEN's anti-skid ramp flooring system. An epoxy-and-aggregate broadcast build creates a high-traction, abrasion-resistant surface engineered for vehicle ramps and sloped drives where grip is critical. For sun-exposed ramps it is finished with a heat-reflective protective top coat, or specified as a UV-stable polyurethane system. Supplied as a pre-measured kit, formulated and manufactured by POLYZEN.
A Pre-Measured System
ZENDECK Grip is built on site from POLYZEN materials, each supplied as a pre-measured kit and covered by its own Technical Data Sheet.
| # | Layer | Product / operation | Consumption |
|---|---|---|---|
| 1 | Surface preparation | Diamond grinding / shot blast to CSP 3 | — |
| 2 | Primer | ZENPRIME 100 | 0.18 kg/m² |
| 3 | Base coat | ZENTOP CL 100 + Part D, by roller | 0.60 kg/m² |
| 4 | Broadcast | ZENGRIT 12, heavy, to refusal | 4.5 kg/m² retained |
| 5 | De-sand | Sweep and vacuum after cure | — |
| 6 | Seal coat | ZENTOP CL 100, clear or pigmented | 0.80 kg/m² |
Consumption figures are practical site values including normal wastage — use them for estimating. Broadcast figures are the quantity retained; broadcasting to refusal needs 5 – 7 kg/m² applied, and the excess is recovered and reused. Mix ratios, pack weights and cure data are published on each product Technical Data Sheet.
Grip is specified as an epoxy broadcast system with a heat-reflective protective top coat for sun-exposed ramps, or as a fully UV-stable polyurethane configuration. Mix ratio, pack weights and cure data are published on the product Technical Data Sheet (TDS). Formulation is proprietary to POLYZEN.
Performance Data
Full tested values are listed on the product TDS. Figures below will be populated from verified test reports.
| Property | Value | Test Method |
|---|---|---|
| Compressive Strength | Per TDS | Per TDS |
| Bond / Adhesion Strength | Per TDS | Per TDS |
| Abrasion Resistance | Per TDS | Per TDS |
| Slip / Skid Resistance | Per TDS | Per TDS |
| Chemical / Fuel Resistance | Per TDS | Per TDS |
| Applied Thickness Range | Per TDS | — |
| Finish | Textured / Anti-Skid | — |
| Exposed-Ramp Top Coat | Heat-Reflective / UV-Stable | — |
| VOC Content | Per TDS | Per TDS |
How Far Does a Kit Go?
Coverage depends on applied thickness, aggregate broadcast rate and number of coats. The exact coverage rate is specified on the product Technical Data Sheet. Use the POLYZEN Coverage Calculator for project estimates.
Where ZENDECK Grip Performs
Common Questions
Want this ramp coating installed by POLYZEN?
Get ZENDECK Grip delivered as a complete applied system — survey to warranty.
Explore the ZENDECK Range
Get Your ZENDECK Grip Quote
Project pricing, trade enquiries and spec support — talk to POLYZEN.